The 8 Biggest Threats To Your Washer Machine

The 8 Biggest Threats To Your Washer Machine

There are several different things that can damage your washer. If you want to ensure that your appliance functions properly, you need to be aware of the things that can harm it. If you’re not careful, certain types of threats can cause leaks that can also damage the area around the washer. If you understand that various threats to your washer, you can avoid spending a lot of money on a plumber.

#1: Worn Hoses

Hoses are one of the most fragile parts of your washer. They can get damaged pretty easily. Normally, the hose can last for two years before you need to replace them. Make sure that you are aware of the condition of your hoses – if you don’t, you might have to deal with leaks.

#2: Small Loads

Washing small loads doesn’t seem like much of a threat, does it? They don’t consume as much water as larger loads. However, they do use the same amount of energy as bigger loads of clothing.
If you typically wash smaller loads, you will need to run the washer more often than you would if you were running larger loads. This causes more wear and tear on your appliance which could require more maintenance. Try washing mostly larger loads and you will save energy.

#3: Zippers

Zippers are an often-overlooked factor in keeping your washer healthy. Zippers can cause harm to more delicate clothing, but they can also damage your appliance if they are caught on the appliance’s drum.
Additionally, if a zipper continually scratched the glass panel on the front of the washer, it can explode. Broken panels can become a hassle to repair. To prevent this, check and make sure that each zipper is zipped up.

#4: Coins

Everyone forgets that they have change in their pockets, don’t they? This is a mistake you want to avoid if you want to keep your washer safe. Coins can crash into the drum of your washer can cause a lot of harm if you’re not careful.

#5: Cold water

Cold water is another threat that seems harmless. Using hot water uses more energy and can result in fading. However, cold water can harm your washer if you’re not performing the proper maintenance.
If you run a regular maintenance cycle, you can prevent any damage. Turn on the machine using the hottest setting and pour in a cup of vinegar. Doing this will remove mineral deposits. It’s best to run a maintenance cycle once a month.

#6: Wet Clothing

Try to avoid leaving wet laundry in the washer for a long time after the cycle has run. Wet clothes are a breeding ground for mold and odors.
As much as you can, make sure that you remove wet loads from the washer right when the cycle ends. This will ensure that mold won’t have any time to grow.

#7: Too Much Detergent

Don’t overdo the detergent. Yes, you might be wanting to make sure your clothes are extra clean, but too much detergent can damage the control panel. Make sure you read your washer’s manual careful to find out how much detergent you should be using.

#8: Too Much Laundry

While it is better to use larger loads, you don’t want to put too many clothes in the appliance. Excessively large loads can cause more wear and tear to the suspension and bearings. Your manual should tell you how much clothes to put in.

While there are several threats that can harm your washer, it is not too difficult to make sure your appliance remains in good running condition. Watch out for the issues listed in the article, and your washer will live a long life. If you do experience a leak or other such issue, it’s best to reach out to a plumber who can help you fix it.

Add Comment

Your email address will not be published. Required fields are marked *